When comparing blown in insulation and fiberglass batt insulation, it is essential to look at both the total cost and the lifespan of the blown-in cellulose. Houston blown in insulation has a higher lifespan than fiberglass, which is around 20 years. Cellulose is environmentally friendly and more effective at blocking air than other forms of insulation. It also has the added benefit of providing a higher level of fire protection and is made of recycled materials. However, it is not necessarily a more expensive material than fiberglass or batt insulation. They’re both similar in cost.
There are many reasons for dampness and mold growth in a home’s attic. Poor ventilation, improper air sealing, and a lack of insulation can all cause the problem. If you want to make sure your attic is adequately insulated, hire a professional to come in and inspect your home. A certified attic inspector can identify these issues and recommend the proper amount of blown-in insulation. It’s also important to check for signs of mold growth, which can signal the presence of other problems.
Though blown-in insulation is slightly more expensive than fiberglass batts, the savings you will realize will be well worth the cost. Additionally, the additional cost of installation can be easily recovered by energy savings within two to four years. Blown-in insulation also has a unique feature: its airtight seal. This means that noise cannot travel through walls, preventing unwanted noise from entering the home. Blown-in insulation is also known to act as a sound buffer, so it can prevent unwanted street noise from causing disturbances in the home.
Blown-in insulation is an ideal option for attic insulation because it eliminates the need for invasive and expensive installation. It is also a quick and easy process, with no need to stand on your knees or crouch over the floor. Instead of installing the insulation yourself, a technician will blow it in from a hose. Blown-in insulation will make your attic airtight and reduce the risk of fire.
When choosing blown-in insulation, you should consider your local climate and the R-value of the material. Higher R-values are important for colder climates, so your insulation layer must be thicker. Cellulose is denser than fiberglass, so you may need more bags per square foot. It also has a higher R-value per inch, which means that it requires less depth to reach the same overall R-value. When comparing quotes, make sure to ask for a firm itemized bid for all insulation materials.
Fiberglass and cellulose are both fire-resistant, but cellulose has a long drying time. Occasionally, an ice dam or leaky roof will saturate the cellulose and cause it to become moldy. Even though these types of insulation are treated with additives to prevent mold growth, mold will still grow, and the only way to remove it is to scoop it into contractor’s plastic bags. If you are considering a new insulation installation, blown-in insulation may be the best option for you.
If you have ever worked on a DIY project and decided that you would like to improve the insulation level in your attic, you should know the depth of the existing insulation. To do this, you’ll need a ruler, a flashlight, and a tape measure. Make sure that you have a safe and easy-to-access attic. If the attic has a door or hatch, use a ladder to reach the roof. Once inside, use a ruler to measure the thickness of the insulation.
Unlike batt insulation, blown-in insulation is more difficult to remove if you discover a rodent nest. This makes it harder for you to locate the location of the rodent nest and put up a baiting station. Because the insulation is so prone to damage, it’s important to find the source of the problem and get rid of it once and for all. If you don’t want to deal with the problem, hire a professional.
If you’re planning on using blown-in insulation, make sure to hire a professional. This will cost you between $500 and $2,000 for an entire house. However, hiring a professional to do the job can help you save money and ensure an even covering of the wool. A well-trained team will be able to complete the job in a day or two with minimal mess. You’ll also save more than a quarter of a percentage on your energy bill.