Epoxy Pipe Lining is a cutting-edge plumbing technique that coats the inside of existing pipes. This new lining helps extend their lifespan and prevents corrosion, and it’s less invasive than traditional dig-and-replace methods.
The team saturates a malleable, woven felt liner with epoxy resin, then inserts it into your pipe through existing access points like cleanouts. An inner bladder is then inflated, which shapes the liner to the pipe and cures it.
Whether it’s to fix a leak or stop the flow of corrosive substances, you need your pipes to be as functional as possible. Fortunately, a solution exists that’s much more cost-effective than a full pipe replacement: epoxy lining. The process is a great option for homes and commercial buildings with aging pipes that are in danger of failure.
During the repair process, contractors will use video sewer cameras to evaluate the state of your current piping system and determine if it’s a good candidate for lining. Once the evaluation is complete, the pipes will be prepped by cleaning and hydro jetting. Then, a woven felt material is soaked in epoxy resin and inserted into the affected pipeline section. An inner bladder is inflated to form the material, and it’s allowed to cure for up to four hours to create a new pipe structure inside your existing pipes.
This non-invasive pipe restoration method is significantly less expensive than traditional plumbing methods because it eliminates the need for excavation or destruction of your property. In addition, repairing your pipes with epoxy will save you money in the long run as it will prevent the formation of toxic materials that can leach into the drinking water.
Corrosion-resistant epoxy liners are extremely durable and can withstand a wide range of temperature changes. In fact, they can even be installed in areas that are hard to reach with other repair techniques. These liners are designed to last up to 50 years and prevent corrosion, leaks, and breaks that can affect the quality of your plumbing.
It’s also important to note that a damaged or leaking pipe can lead to mold and mildew growth, which could damage the structure of your home or business. Additionally, corroded pipes can lead to high energy bills because of decreased flow capacity. However, repairing your pipes with epoxy will restore their original functionality and reduce your utility costs.
Pipe corrosion is a serious problem that can lead to expensive repairs and structural damage. Fortunately, this problem can be solved with epoxy pipe lining. This process is also less invasive than traditional excavation and pipe replacement methods. It also reduces downtime and property losses for building owners.
The slick inner coating of the epoxy liner increases flow capacity and prevents calcification deposits from sticking to the inside of pipes. It also makes them more resistant to corrosion and prevents leaking and breaking pipes. This enables the pipes to last longer than they would with standard pipe materials.
Epoxy lining is also effective for pipes with limited access. It can be used to repair pipes in crawl spaces and under concrete slabs, and it can even be installed inside a wall without disrupting the structure of the building. This method is ideal for restoring older plumbing systems in commercial and residential buildings.
Unlike other pipe repair methods, epoxy lining is non-invasive. It requires minimal excavation and disturbance of the surrounding landscape and structures, making it an eco-friendly option. This also means that you can continue your daily business without having to shut down operations for weeks while the pipes are replaced.
In addition, epoxy liners can be installed in many different types of pipes. This includes copper, steel, iron, and PVC pipes. It is especially useful in repairing cracked and broken pipes. In fact, it is often a better choice than replacing the entire pipeline, as it can save you up to 50% of your total replacement costs.
If you’re considering an epoxy lining solution for your property, the first step is to evaluate the existing pipes. This can be done by conducting a sewer camera evaluation or physical inspection. Once you’ve determined that the pipes are a good candidate for lining, the next step is to prepare the pipes. The pipes must be free of blockages and cleaned to ensure that the lining will adhere properly.
Once the piping is ready, the epoxy resin will be applied to the interior of the pipe. It is then cured and hardened to create a new, protective inner layer that will last for decades. This technique is often referred to as CIPP, or cured-in-place pipelining. This is a popular alternative to repiping and can be used in a variety of applications, including hot water recirculation, sanitary sewer, stormwater, and fire sprinkler lines.
Pipes that are used to transport water, sewage, and other liquids are prone to corrosion over time. While many traditional sewer repiping methods involve digging trenches and disrupting daily life, epoxy lining is a non-invasive option. It involves lining the interior of existing pipes with an epoxy resin, which effectively creates a new pipe within your old one. This pipe lining system is used in a variety of applications, including for commercial and residential plumbing.
This method of pipe lining requires less labor than conventional excavation and replacement techniques, which means that it is safer for your property. It also minimizes the amount of waste that is produced during the installation process. Furthermore, it can be applied to a wide range of metal pipes, including those in your home or business.
The process begins with cleaning the pipe and removing any blockage. Once this is done, a technician will measure the length of the pipe to determine how long the liner should be. The liner is then saturated with the epoxy resin and inserted into the existing pipe using either the pull-in-place or inversion process. The liner is cured using heat or left to cure on its own in the ambient environment.
Once the liner has been installed, it will create a seamless, corrosion-resistant, and damp-proof pipe that is extremely durable. In addition, the epoxy coating is highly chemical-resistant and can be used in a variety of situations. This is why it is a preferred solution for restaurants, schools, hospitals, and U.S. Navy ships.
Additionally, the epoxy coating is completely safe for your drinking water and does not emit toxic fumes. Traditional repiping processes can contaminate your potable water with harmful bacteria and microorganisms, but the flexsleeve pipe lining system does not have any such risks. This is because the epoxy that is applied to your pipes is UL certified safe to NSF/ANSI Standard 61.
If you’re interested in getting your pipes repaired with an eco-friendly and non-invasive method, call us today for more information about our epoxy pipe lining services. We can help you restore your damaged piping quickly and affordably.
Your pipe system plays an integral role in delivering water and drain services to your home or building. It’s important to keep your piping system in good condition to avoid problems like flooding, mold growth and clogged pipes. This is where epoxy lining comes in. It is a non-invasive and affordable solution for repairing old metal plumbing. In addition, it can be used in a variety of situations, including commercial and industrial applications.
Unlike traditional pipe replacement, which requires digging up the ground to replace piping, epoxy lining can be installed underneath your property without disturbing the surface of the earth. This makes it a better choice for homeowners who want to save money on excavation and restoration costs. It’s also ideal for business owners who don’t want to disrupt their operations during the process.
It can be applied to pipes of any size and is a highly scalable solution for rehabilitating aging pipes. The process begins with a thorough inspection of the existing pipes to identify the cause of the blockage or corrosion. After that, the pipes are cleaned using high-pressure water or mechanical cleaning methods to remove any debris and contaminants that have accumulated in the pipe walls over time. Once the pipes are clean, a flexible liner saturated with epoxy resin is inserted into the damaged pipe. Then, an internal bladder is inflated to press the liner against the pipe wall. The epoxy cures, typically in a matter of hours, leaving a new pipe-within-a-pipe.
One of the most significant benefits of epoxy pipe lining is its longevity. It can last up to 15 years, making it a great investment for your home or business. In contrast, traditional sewer pipe replacement can last only 10 to 12 years. To ensure that your epoxy lining lasts as long as possible, it’s important to follow some best practices for maintaining the pipes.
The most common mistake that causes epoxy liners to fail is poor installation. A CIPP company must install the liner in accordance with strict manufacturer specifications to ensure that it adheres evenly to the pipe walls and does not develop cold spots or cracks. It’s also important to use hot water or steam during the curing process to speed up the hardening of the epoxy. Alternatively, the resin can be passively cured in the ambient temperature of your property for a similar result.